Rear speakers & subwoofer adapter for Audi
When replacing the factory radio on AUDI cars, it may happen that after installing a new radio (e.g. Sony Pioneer or other) the rear speakers and Subwoofer do not work. Iso cubes alone are not enough. You need a special module, after which everything will work fine.
We offer a brand new car module:
- AUDI A3 – all models
- AUDI A4 – all models
- AUDI A6 – all models
- AUDI A8 – all models
- AUDI TT
manufactured before 2007
How to check if you have this module?
99% Audi has such a module. Usually after replacing the factory Audi radio with other non-factory (Alpine Clarion …) it turns out that the speakers in the back and the subwoofer that you have in the trunk in the bacon stop playing. The factory-fitted Audi radios have amplifier outputs for the front speakers, and the rear and the subwoofer only output the signal from the mini-iso socket. The module we offer will allow you to restore the subwoofer and rear speakers. Audi has 2 types of audio systems. The weaker to which this module fits and the more powerful Audio Bose System – to which this module does not fit.
How do you know which one you have? You can only do it yourself by checking what is written on the subwoofer in the rear in the trunk or on the speakers in the door or in the back shelf. If you do not have a BOSE system then you have luck. The module offered at this auction fits
Designed to run the rear speakers and the original subwoofer in the trunk after replacing the radio from the factory for other types SONY PIONEER PANASONIC BLAUPUNKT KENWOOD JVC ALPINE CLARION and others.
Installation of the module consists only in the cubes in the car. You need to connect 3 cubes that only fit together in one position – there is no way to go wrong. Installation of the module is very simple and you can do it yourself without visiting an electrician. The cubes only fit in one position and cannot be attached differently. You can’t go wrong. The module is Italian production and as the only one you can buy from us has AUDIO LEVEL ADJUSTMENT for the rear speakers. This allows you to ADJUST THE SUBWOOFER VOLUME !!! and rear speakers to the rest of the speakers in the car. The module has very high parameters and does not introduce any noise or interference.
In addition, if you have a chinch output on your new radio on the amplifier, thanks to this module you can use it. Just unplug the chinch cables from the black box and plug them into the chinch outputs on the radio. The speakers and subwoofer at the back will play, and from the black box you will get two additional outputs for an additional amplifier or active tube.
ADJUSTING THE SIGNAL LEVEL
POSSIBILITY OF BYPASSING UNNECESSARY TRANSMITTERS THAT MAY DISTORT THE SIGNAL LIKE IN OTHER CHEAP MODULES
IT IS POSSIBLE TO ENTER AN ADDITIONAL OUTPUTS TO AN ADDITIONAL AMPLIFIER OR SUBWOOFER
THE MODULE HAS A GALVANIC SEPARATION OF THE AMPLIFIER SIGNAL ON THE RADIO WITH THE AMPLIFIER INPUT.
THE MODULE MEANS THE FUNCTION OF A LOOP FILTER
The cubes are soldered and pressed
You will receive a 24-month warranty on the item you purchased. In case of damage.
Only logged in customers who have purchased this product may leave a review.