Hej!

If you have a problem to choose correct firmware or map version, fill up the bellow form and we will contact you with correct links.

How to fill the form?

The most important thing is your current firmware version and current map version. With those informations we can be sure, that chosen update is correct! but how to check those informations?

Also remember, that some cars from 2010+ might have same system like cars manufactured before 2010.

THIS IS VERY IMPORTANT PART! DO NOT SKIP!

If your car has been produced before 2010

Enter setup > Version information

SW: is your current firmware version

If your car has been produced between 2010 – 2016

You need to enter SETUP > Version information

Audi MMI 3G Plus map update
Audi MMI 3G Plus map update

Media version: is your current firmware version
Nav. database version: your current map version

in some cars, you might not see firmware informations here, so you need to enter RED ENGINEERING MENU

You will see screen similar to this, and again Most train is your current firmware version

If your car has been manufactured after 2016

There’s a new type of MMI, informations about firmware and maps can be found also in Setup > Version informations but not only, and not in every car. So if you enter Setup > Version information and you will see this:

Then you can enter Software version as current firmware version and Navigation database overall version as current map version. But if you see something like CLUBx_XXXXXX then you need to enter RED ENGINEERING MENU

Select your car from below diagram and enter REM (Red Engineering Menu).

How to enter REM or GEM in Mib2

You will see informations like on this photo

Request form